OBDeleven Travel Assist

Faults and Technical chat for the CUPRA Born
Post Reply
Betty b
Posts: 261
Joined: Sat May 21, 2022 12:46 am

Post by Betty b » Sun May 29, 2022 7:58 pm

Added this today to the born

E64E76AB-E4C1-4390-AAF5-7C4B29FB571C.jpeg

570D8FA3-527A-41FE-AFC3-826444F5A918.jpeg

Cupra Born V2 | Tech-L | Vapour Grey

pws7482
Posts: 29
Joined: Tue Apr 26, 2022 6:57 am

Post by pws7482 » Sun May 29, 2022 8:22 pm

Is this through purchasing on the online store or software update?
Cupra Born Geyser Silver
V2 58kw Tech Pack L
Collection date 18/07/22

Betty b
Posts: 261
Joined: Sat May 21, 2022 12:46 am

Post by Betty b » Mon May 30, 2022 5:18 am

I had OBDeleven from a previous car and thanks to someone on the id3 forum I used the long coding to activate, if anyone want any info just ask
Cupra Born V2 | Tech-L | Vapour Grey

SimonBartlett
Posts: 1
Joined: Sat May 28, 2022 9:27 pm

Post by SimonBartlett » Mon May 30, 2022 8:44 am

Please can you send me info on activation and if the v2 has the necessary kit to activate it. Thanks

Betty b
Posts: 261
Joined: Sat May 21, 2022 12:46 am

Post by Betty b » Mon May 30, 2022 5:13 pm

This is the long coding, Thanks to the guys from id3 forum, but slight difference in mine is the memory after ignition cycle has been coded.

4C3CB990-0AC0-4BFF-B0E8-A7509DF3E35E.jpeg

Before bytes 6 7 and 8 are 08 E0 and 07

After bytes 6 7 8 are 10 F4 and 16 if you want it to remember last setting
Cupra Born V2 | Tech-L | Vapour Grey

Darksingh
Posts: 2
Joined: Tue May 31, 2022 3:48 pm

Post by Darksingh » Tue May 31, 2022 3:52 pm

This seems amazing! I have a V2 with Tech L and would love to do this to mine. I don't understand how to do it? is a step by step guide possible? or to point me in the right direction. Thanks

Betty b
Posts: 261
Joined: Sat May 21, 2022 12:46 am

Post by Betty b » Tue May 31, 2022 5:11 pm

If you have OBDeleven then it’s just a case of clicking on long coding, that brings up all the borns control units, your looking for A5 in there bytes 6 7 and 8 need changing to the new values, then press and hold save and your done 👍
Cupra Born V2 | Tech-L | Vapour Grey

Darksingh
Posts: 2
Joined: Tue May 31, 2022 3:48 pm

Post by Darksingh » Wed Jun 01, 2022 11:17 am

Does travel assist work as it should?

monkeyhanger
Posts: 477
Joined: Tue May 31, 2022 8:12 pm

Post by monkeyhanger » Wed Jun 01, 2022 4:19 pm

Darksingh wrote:
Wed Jun 01, 2022 11:17 am
Does travel assist work as it should?
No, it's pretty much useless without the capacitative steering wheel that isn't standard fit on the ID3 or the Born. Without the capacitative wheel, the car assumes you're not in control, unless you jerk the steering wheel within every 15 seconds, as it can't detect your grip. TA is supposed to guide you around the bends, to just have a gentle grip on the wheel. When you have to jerk the wheel every 15 seconds, which then requires the TA to correct it, it is pointless. I have it enabled on mine purely to ha e an extra lit button on the steering wheel.
2022 V2 E-Boost L-Tech Pack - Aurora Blue
2023 Audi S3 - to avoid rapid charging on long journeys.

Octopus referral: https://share.octopus.energy/lush-fawn-565

Betty b
Posts: 261
Joined: Sat May 21, 2022 12:46 am

Post by Betty b » Wed Jun 01, 2022 7:20 pm

Been out today in ours and the amount of touch to correct is very minimal, just a slight grip on the wheel cancels the warning but if you drive with your hand / hands on the wheel it assist you and found it very impressive especially on the corners.

Not driven a car with it factory fitted but I’ll definitely use on a long motorway run.
Cupra Born V2 | Tech-L | Vapour Grey

Post Reply